4H
Pencil hardness
Hard, scratch-resistant cured film.
Where surfaces become smarter.
Alturion LLC protective coating systems are designed to preserve surfaces, resist wear and reduce microbial risk.
Antimicrobial effectiveness depends on the application and evaluated organism. Protection depends on the coating remaining intact. Efficacy qualifications.
Protection for demanding environments.
A two-component clear coat combining high-performance durability with active antimicrobial technology.
Performance
Resistance to UV exposure, chemicals, impact and graffiti.
Protection
Quick Kill Technology and a repairable finish.
Value
A clear finish, extended asset life and lower maintenance.
Confirm current, application-specific efficacy and regulatory claims with Alturion LLC before specification. Continuous protection depends on the coating remaining intact.
Technology and performance
Performance properties
Built to perform
Performance properties of the two-component clear coat.
Confirm application-specific performance and suitability before specification.
Low
VOC content
Low-VOC, EPA-compliant formulation.
High
Solids
High-solids build for durable coverage.
UV
UV resistant
Holds up to sunlight without yellowing.
Chemical
Chemical resistant
Withstands cleaners and solvents.
Corrosion
Corrosion resistant
Shields substrates from corrosion.
Impact
Impact resistant
Absorbs knocks without cracking.
Graffiti
Graffiti resistant
Marks and paint wipe away cleanly.
Weather
Weather resistant
Performs across demanding climates.
550°F
Service temperature
Rated to 550°F service temperature.
Repairable
Repairable finish
Damage can be spot-repaired in place.
Approx. 1200
Sq ft per unit
Approx. 1200 sq ft per unit coverage.
Performance, protection and value
Performance
- Industrial-grade durability
- Excellent UV resistance
- Chemical resistance
- Impact resistance
- Graffiti resistance
Protection
- Patented Quick Kill Technology
- Long-term antimicrobial activity
- Broad-spectrum effectiveness
- Repairable finish
Value
- Lower maintenance
- Extended asset life
- Clear, invisible finish
- EPA-compliant coating formulation
Antimicrobial effectiveness is subject to the evaluation qualifications; continuous protection depends on the coating remaining intact.
The difference is active
The difference is not a better finish — it is a different category. Ordinary coatings protect how a surface looks. Alturion LLC protects what the surface does.
| Traditional coatings | Alturion LLC coatings |
|---|---|
| Protect appearance only | Protect appearance and the surface |
| Passive finish | Active antimicrobial technology |
| Standard durability | High-performance durability |
| Conventional finish | Repairable finish |
| Limited functionality | Multi-layer performance |
Others cover the surface. Alturion LLC defends it.
Antimicrobial statements retain the evaluation qualifications and coating-intact condition.
How the coating works
The active coating layer draws negatively charged pathogens to the positively charged cured surface.
Passive film
Covers the surface — contamination remains, exposed.
Active protection
Negatively charged pathogens are drawn to the positively charged cured coating, then destroyed on contact.
Illustrative coating schematic. Protection persists as long as the coating remains intact. Confirm current, application-specific efficacy and regulatory claims with Alturion LLC before specification. Review the organism-specific qualifications.
Apply Alturion LLC coating
A thin-film protective layer is applied to the surface.
Protective layer cures
The coating hardens into a durable, bonded film.
Pathogens contact
Negatively charged pathogens meet the coated surface.
Attraction
Positively charged antimicrobial technology draws them in.
Neutralization
Pathogens are destroyed on contact with the surface.
Continuous protection
Defense persists as long as the coating remains intact.
Evaluated organisms
Evaluated organisms
Alturion LLC’s quick-kill technology has been evaluated against a range of clinically significant bacteria and viral surrogates.
- MRSA
- Methicillin-resistant
- VRE
- Vancomycin-resistant
- E. coli
- Escherichia coli
- Salmonella
- Salmonella enterica
- MS2
- Bacteriophage
- COVID-19
- Preliminary testing*
Surfaces and application
One coating. Many surfaces.
One versatile system, engineered to bond across a wide range of substrates — from structural materials to soft finishes — without a specialized coating for every surface.
- Concrete
- Wood
- Plastic
- Metal
- Paint
- Laminate
- Vinyl
- Ceramic
- Fabric
Preparation, application and cure
Prepare the surface, apply the coating, then allow it to dry and cure.
Simple application
A straightforward, thin-film process — no specialized equipment, no complex chemistry on site. Prepare, apply, cure, and protect.
Surface preparation
Clean and prepare the substrate.
Apply
Thin-film application to the surface.
24 hours dry
Coating dries to the touch.
Three-day cure
Full cure develops durability.
Years of protection
Long-term, active defense.
Dry to touch at 24 hours is distinct from full cure at three days. No quantified warranty duration or additional mixing/safety instructions are supplied here.
Application methods
Roller
Fast, even coverage on broad, flat surfaces.
Brush
Precise control for edges and detail work.
Microfiber pad
Ultra-thin, uniform film for a clear finish.
Where it can be used
- Healthcare
- Hospitality
- Education
- Commercial
- Transportation
- Government
- Food Processing
- Manufacturing
- Office Buildings
Application categories; not customer installations or endorsements.
Explore compatible surfaces